Bbk-performance 25260 User Manual
Browse online or download User Manual for For the car Bbk-performance 25260. BBK Performance 25260 User Manual [en]
- Page / 1
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Gripp Performance Rear Upper
Control Arms
INS-035
Step 1
Carefully place the rear of vehicle on jack stands located at the frame – not the rear axle.
! CAUTION !
Use extreme caution when working under vehicle
Step 2
Using a hydraulic floor jack, raise the rear axle housing under the center section until the axle reaches
approximate ride height. Place jack stands under the axle for safety.
Step 3
Working on one side at a time, remove upper control arm by removing two bolts securing it to the chassis
and rearend housing. Apply a liberal coating of general purpose grease on the new control arm bushings. With
grease Zerk facing the ground reinstall and tighten control arm completely, using a drop of Loc-Tite™ on each
mounting bolt.
Step 4
Follow the same procedure for the other side.
Step 5
You may now lube both grease fittings and reinstall dust caps.
Step 6
Drive the car for approximately 5-10 miles, recheck all nuts and bolts for proper torque specs.
INSTALLATION INSTRUCTIONS
www.BBKPERFORMANCE.com
A BBK Company
IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).
BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).
1
Summary of Contents
Page 1 - Control Arms
Gripp Performance Rear UpperControl ArmsINS-035Step 1Carefully place the rear of vehicle on jack stands located at the frame – not the rear axle.! CAU
Related products and manuals for For the car Bbk-performance 25260
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.137 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals