Bbk-performance 15050 User Manual download pdf

Firewall Clutch Cable

Adjuster

INS-067

Step 1

Working from under the vehicle, remove clutch cable

from the clutch fork.

Step 2

Working from under the dashboard, remove the

clutch cable from the quadrant assembly.

Step 3

Working from under the hood, remove the sheet-

metal screw attaching the clutch cable housing to

the firewall. Once removed, simply pull the housing

and exposed cable from the opening in the firewall.

Step 4

Remove the large, black rubber isolator from the

clutch cable housing end where it was attached to

the firewall, then slide the knurled portion of the

adjuster over the cable, onto the opening in the fire-

wall.

Step 5

Make sure the adjuster body is threaded completely onto the knurled

portion of the adjuster, then insert the

complete assembly into the firewall. Line up the screw hole to the notch and reinstall screw.

Step 6

Reattach the cable to the quadrant assembly first, then to the clutch fork. To adjust the cable, simply twist the

knurled adjuster either cw or ccw to loosen or tighten cable.

INSTALLATION INSTRUCTIONS

www.BBKPERFORMANCE.com

IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).

BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).

A BBK Company

Firewall Clutch CableAdjusterINS-067Step 1Working from under the vehicle, remove clutch cablefrom the clutch fork.Step 2Working from under the dashbo

No comments

Bbk-performance 15050 User Manual